Admission open for 2014-15
The Education Commission has recommended college autonomy which is the instrument for promoting academic excellence. Only 10% of the eligible colleges were targeted to make autonomous at the end of X five year plan. P.E.S. College of Engineering (PESCE), Mandya has become autonomous in the year 2008.
Autonomous colleges are free to make use of the expertise of University departments and other institutions to frame their curricula, devise methods of teaching, examination and evaluation. The parent university will accept the methodologies of teaching, examination, evaluation and the course curriculum of its autonomous colleges. It will also help the colleges to develop their academic programs, improve the faculty and to provide necessary guidance by participating in the deliberations of the different bodies of the colleges.
The right of autonomy may not be conferred once and for all. It has to be continuously earned by the college. The status of autonomy will be granted initially for a period of six years. Each autonomous college will, with the approval of its Academic Council, formulate an appropriate mechanism to evaluate its academic performance, improvement of standards, and assess the extent and degree of success in the utilization of autonomy. In addition, there will be two external evaluations, the first after four years and the second after six years. The latter will determine the continuance or revocation of autonomous status.
The university will review the functioning of autonomy in an autonomous college at the end of the fourth year with the help of a committee constituted for the purpose. This committee may consist of:-one nominee of the UGC; one nominee of the parent university; one nominee of the State Council for Higher Education and two experts from outside the state to be nominated by the university. Dean (Academic Affairs) is the Member Secretary of Academic Council. The Academic Council consists of pannel of expert’s drawn from academia of highest caliber.
Dr. K.N. Umesh, professor of Mechanical Engg., is the Dean (Academic Affairs).
The Academic Council is responsible for all academic matters, such as, framing of academic policy, approval of courses, regulations and syllabi, etc. The Council will involve faculty at all levels and also experts from outside, including representatives of the Visvesvaraya Technological University, Belgaum (VTU) and the Government of Karnataka.
Dean (Academic Affairs) is the Member Secretary of Academic Council. The Academic Council consists of panel of expert’s drawn from academia of highest caliber.
|Principal of the college||Dr. V. Sridhar|
|Heads of departments|
|Dr. K. Narasimhachary
Dr. B. Ramachandra
Dr. M. C. Padma
Dr. T. Vasudev
Dr. B. V. Narasimham
|Dr. G. L. Esawaraprasad
Dr. H. V. Ravindra
Dr. J. Venkatesh
Dr. G. P. Shivashankara
Dr. A. T. Eswara
Dr. H. Ramachandra
Dr. K.N. Murulidhar
|Teachers of the college representing different level of Teaching staff|
|Dr. B.G. Nareshkumar
Dr. P.S. Puttaswamy
|Dr. K.A. Radhakrishna Rao
Dr. C. J. Gangadhara Gowda
Dr. H.S. Sheshadri
|Experts from the outside the college representing areas such as Industry, R&D. Tech Edn.,|
|Sri. Ananth Koppar, CEO, K2 Tech. Bangalore
Dr. S.R. Kunte, Principal, JNNCE, Shimoga
Dr. K. Ramachandra, Ex, Dir, GTRE, Bangalore
|Dr. M.S. Shivakumar, Principal, NIE, Mysore
Dr. B. Shivalingaiah, Ex, Dir, KREDL, Bangalore
|Nominees of the VTU|
|Prof. D.K. Subramaniam,
Dean & Professor (Rtd.)
Indian Institute of Science, Bangalore
Dr. G. Raghavendra Rao, Vice Principal, NIE, Mysore
|Dr. S.N.Shashidhara, Principal,
KSITGroup of Institutions, Bangalore
|Member Secretary (Dean)||Dr. K.N. Umesh, Professor of Mech. Engg|
The Board of Studies (BOS) is the basic constituent of the academic system of an autonomous college. Its functions includes framing the syllabi for various courses, reviewing and updating syllabi from time to time, introducing new courses of study, determining details of continuous assessment, recommending panels of examiners to constitute the Board of examination under the semester system, etc. The Details of the program run by various departments are as followsClick here for details
|Sl. No.||UG Program||Host Department|
|1||Civil Engineering||Civil Engineering (1962, 90)|
|2||Mechanical Engineering||Mechanical Engineering (1962, 90)|
|3||Electrical & Electronics Engineering||Electrical & Electronics Engineering (1962, 40)|
|4||Electronics & Communication Engineering.||Electronics & Communication Engineering (1971, 60)|
|5||Information Science||Information Science (2000, 30)|
|6||Computer Science & Engineering||Computer Science & Engineering (1983, 120)|
|7||Environmental Engineering||Environmental Engineering (1987, 30)|
|8||Automobile Engineering||Automobile Engineering (1980, 30)|
|9||Industrial & Production Engineering||Industrial & Production Engineering (1980, 40)|
|PG Program||Host Department|
|1||M.Tech Computer Science & Engineering||Computer Science & Engineering|
|2||M.Tech CAD of structures||Civil Engineering|
|3||M.Tech Environmental Engineering||Environmental Engineering(1987, 18)|
|4||M.Tech Computer Integrated Manufacturing||Mechanical Engineering(1999, 18)|
|5||Master of Computer Applications||Master of Computer Applications (1992, 45)|
|6||Master of Business Administrations||Master of Business Administrations (2009, 60)|
|Seat||Aided Course||Un - Aided Course||COMED -K|
|CS&E||IS & E||ENV|
|Government/ CET *||18,090||38,090||1,00,000||75,000||50,000|
|Management||Contact PET Office|
|Intake /Quota||Aided Course||Un - Aided Course|
|1||E & C - Engg.||2295||12025||8786||6276||7420||9246||4768||4621|
|2||CS & - Engg.||4305||22363||21493||28663||12678||17354||8089||8699|
|3||Mech - Engg.||5528||21756||15891||17948||14061||12520||10986||11718|
|4||E&E - Engg.||6075||26739||20706||16629||14670||22902||16064||10057|
|5||Civil - Engg.||8196||21622||24287||19179||17250||15264||14069||14232|
|6||I & P - Engg.||14114||55527||45685||42599||43128||31100||17809||23621|
|7||Auto - Engg.||11856||51861||-||41340||28001||34186||17770||15749|
|8||Envl - Engg.||21657||67749||-||-||54025||-|
|9||I S & - Engg.||7783||38368||41678||23908||23249||10387||-|
|1||H.D.Chowdaiah, B.Sc. (Agri) Ex.M.L.A & M.L.C ,
President, PET®, Mandya
|2||Sri H.Honnappa Ex.M.L.C Secretary,
Secretary, PET® Mandya
Vice President PET®, Mandya
|6||The Director of Technical Education
in Karnataka, Palace Road, Bangalore
All India Council for Technical
Education, S.W.R.O Bangalore
Retd. Professor , Chennai-600 020
|9||Prof. H.V. Venkatakrishna
Padmanabhanagar, Bangalore-560 070
(State Govt. Nominee)
|10||Dr.K.N. Umesh Prof. of Mechanical Engg.,
PES College of Engineering, Mandya.
PES College of Engineering, Mandya
|Principal & Member Secretary|
|13||Dr. Narian Singh
UGC, New Delhi
|Member (UGC Nominee)|
All the decisions made by other supervisory bodies/Committees of the Autonomous system are reviewed periodically by the BOG.
|Dr. K.N. Umesh, B.E., MTech (IITM), PhD. (IITB), FIE. MISTE. is a Professor Mechanical Engg., and Dean (Acad), at P.E.S. College of Engg., Mandya, Karnataka (India). He has 30+ years of service. He has experience in teaching, administration, supervision and entrepreneurship, besides being knowledgeable in many Computer skills. He is a certified trainer of Industrial Automation from VTU-Bosch Rexroth Centre of Competence.|
He has worked as Member, Coordinator, and Chairman on various panels of University bodies. He is a coauthor of A Primer on Computer Aided Engineering Drawing for I/II Semester Bachelor of Engineering -1st VTU Pub, 2006(1st Ed), 2009 (2nd Ed) and Author of e-Learning Material on Kinematics of Machines.His academic interests are - Kinematics and Dynamics of Machinery, Machine Design and Drawing, Microprocessors and its applications, Robotics, Condition Monitoring of Machineries, CAD, Computer Hardware and Software, etc.
|Dr. B.Ramachandra , MTech,Ph.D
Controller of Examinations
Dept. of Electrical & Electronics Engg.
Dr. A.T. Eswara, MSc, Ph.D
Dy. Controller of Examinations
Professor & Head
Dept. of Mathematics
The conduct of examinations in the autonomous system is an important academic activity to bring out the student’s performance. In this context, Autonomous Examination Cell (AEC) plays a key role in the evaluation process. Indeed, performance of a student is highlighted by various methodologies devised by autonomous regulations of the institution and consequently highlighted through office of the AEC. At each and every stage in the evaluation process, including Continuous Internal Evaluation (CIE) and Semester End Examinations (SEE) and Make-up examinations (MUP), Controller of Examinations (COE) along with Deputy Controller of Examinations (Dy. COE) meticulously monitor the performance of students by giving suitable guidelines to various departments in the institution from time to time.
The regulations of PES College of Engineering (PESCE) Mandya, governing autonomous examinations have been framed as per the guidelines of Visvesvaraya Technological University, Belgaum (VTU) and University Grants Commission, New Delhi (UGC) guidelines. The academic year comprises of Odd and Even semesters of 20 weeks duration each, along with make-up term of 6 weeks duration for each semester. The academic performance of a student’s is evaluated through a letter grading system based CIE and SEE.
Further the Letter grades are awarded to a student in a course, for which student has registered based on his/her performance in CIE and SEE. The distribution of weightage among these components viz, CIE & SEE is as follows:
|I test(CIE)||I Test ( 35 marks )
There will be a quiz along with test (5 marks) Syllabus coverage is first 40%.
Average marks of two tests and 10 marks of assignment shall form CIE of 50 marks
|II test(CIE)||II Test ( 35 marks )
There will be a quiz along with test (5 marks) Syllabus coverage is next 40%.
|Assignment (CIE)||10 marks|
|SEE||Final examination to be conducted for full syllabus for 100 marks.||SEE marks Reduced to 50 marks.|
The letter grades indicate the level of academic achievements of assessed an a 10 point scale as detailed below
|Letter Grade||Grade – Points||Raw Score||Remark|
|S||10||90 and above||Outstanding|
|G||-||-||Absent for SEE|
|PP(For Non-credit courses)||-||-||Passed|
|NP (For Non-credit courses)||-||-||Not Passed|
SGPA, which is the Semester Grade Point Average, and CGPA which is the Cumulative Grade Point Average.
|Grade Point (SGPA / CGPA)||Percentage of Marks / Class (Grade Point – 0.75) x 10|
|5.75||50 (Second Class)|
|6.75||60 (First Class)|
Students are eligible to register following semesters with the conditions mentioned below.
|III||Can carry maximum of four incomplete courses from previous 2 semesters|
|V||Can carry maximum of four incomplete courses from previous 3 semesters and should have completed all courses of I – Semester|
|VII||Can carry maximum of four incomplete courses from previous 3 semesters and should have completed all courses of I, II &III - Semesters|
Minimum Earned Credit Requirements on all core courses, Elective Courses and major project as specified by the DUGC.
The maximum duration for a student for complying to the Degree requirements is 16 semesters from the date of first registration for first semester.
The AEC is fully automated so as to cater to the requirements such as code generation, grade card printing, preparation of transcripts etc. The evaluation and announcement of results with CGPA and SGPA are done within fortnight of the completion of Semester End Examinations and Make Up examinations.
The Autonomous Examination Cell is making a fair effort to maintain the utmost confidentiality as demanded.